FROG-J

At only 85mm deep, the super shallow FROG-J helps to cut down digging work and is available with a battery backup unit so the motor is able to operate during power cuts. The FROG-J control panel constantly monitors the movement & power of the gate. It always provides a safe power level, which conforms to the current EU Standards. The FROG-J features an innovative new manual release system, accessible from either side of the gate and fully protected from the elements, it is exceedingly simple to operate

AMICO

The new AMICO swing gate motor offers installers a great solution for gate automation. The simple worm drive mechanism is convenient and reliable, capable of opening gate wings of 1.8 metres (about 5’11”) weighing up to 200kg. The AMICO combined with the ZL90 control panel meets UK safety laws in relation to power output of the gate. This makes it easier to make a safe, compliant automated gate without the need for excessive additional accessories, helping to keep costs and installation time to a minimum.

FROG underground gate operator

By far the most popular kind of automation is the underground motor. The CAME Frog underground automation system is without doubt the finest underground automation machine available. The ‘FROG’ automation system can be fitted to new gateways or most pairs of existing gates that you may have. Gold Approved Installers are able to visit your gateway to professionally ensure that the Frog automation system is the best possible solution for your requirement.

FERNI articulated arm gate operator

The FERNI articulated arm gate operator is designed to automate gates that are hung from large brick or stone pillars. A common application for the FERNI motor is a situation, such as a gateway directly on a main road, where the gates’ opening time needs to be as quick as possible. The FERNI gate operator can be fitted to both wooden and metal gates.

ATI worm drive gate operator

The ATI motors are extremely strong and able to cope with heavyweight gates. The strength of the ATI motor is achieved by the irreversibly geared worm drive mechanism. All the models can be operated by all standard CAME accessories e.g. remote controls, push buttons, keypads etc. in the eventuality of a power cut the ATI machine has a key operated manual release mechanism. The ATI gate operator is a cost effective and efficient way of automating your gates.

BX-BK sliding gate systems

The CAME range of electric sliding gate operators has a machine for every size of gate. Residential gates can be opened with the 'BX or 'BXE' machines and commercial gateways with the 'BK' range or the 'BY3500' series. The robust and reliable rack and pinion method of operation is very straightforward and can be used on metal or wooden gates. The sophisticated electronic control panel can be programmed to accommodate timed auto-closure and partial opening to allow just pedestrian access and can accept wired low voltage signalling from the whole range of CAME accessories.

• Control Panels

• Radio Remote Controls

• Digital Keypads

• Key Switches

• Magnetic Key Readers

• Management/Control Access

• Proximity Card Sensor

• Magnetic Card Sensor

• Proximity & Magnetic Cards

• Push Button Switches

• Induction Loop Systems

• Card Readers

• Coin Operator

• Audible Intercom

• Wireless Intercom

• Visual Intercom

• Safety Photocells

• Electric Locks